SOLAR POWER MOUNTING HARDWARE

Most mounting systems now have evolved to using simple non-corrosive extruded aluminum rails with all stainless steel hardware. They go together fast, securely, and unobtrusively. A great variety of flush, tilt-up, low-profile, high-profile, ground, roof, wall, RV, and pole-top mounts are available that can be configured to meet almost any need on almost any surface.

We carry an impressive stock of the most used Uni-Rac, Pro-Solar, and Direct Power & Water products, with other options and product lines readily available. If you don't see what you need, or need help figuring out what you need, please give us a call or drop an email.

To Track, or Not To Track?

If you can make your PV modules face directly at the sun and follow it across the sky, both logic, and real-world experience say you'll harvest more energy. In summer, particularly in latitudes closer to the equator, when the sun is making a big high arc overhead, you can gain 30% to 35% more energy. Often, this is the only way to boost solar pump output, and it happens at the time of year when more water is usually most appreciated.

However, we are not generally fans of tracking mounts beyond the occasional water pump. With moving parts, there will inevitably be maintenance, particularly with the electrically-driven models. Experience has shown that you can practically depend on having to repair something every year. The heat-driven models are more dependable, but they can get blown off course by winds over 10 mph, and the wake up-roll over-face east move happens very slowly in cold weather. Finally, all tracking mounts have a cost problem. In the past ten years, PV modules have halved in cost, tracking mounts have not. They just don't make good economic sense anymore. You want more power and no maintenance? Just buy an extra module or two, put them on fixed mounts, and you'll never need to mess with them again.

SOLAR PANEL PHOTOVOLTAIC MOUNTING HARDWARE

Sharp's Solar Panel PV Racking System (SRS)

Improved aesthetics, streamlined installation

This innovative new solution for residential and light commercial installations uses a shared rail system that requires 30% less rail than conventional systems. That means fewer rail lines to draw and less mounting hardware to install. The racking system is compatible with virtually all types of roofs including asphalt shingles, curved Spanish tiles, concrete tiles and slate, for retrofit or new construction. And Sharp backs every solar module with a 25-year limited warranty, and the racking system with a 10-year limited warranty.

Adjustable slider assemblies

These adjustable slider assemblies speed up installations with their generous vertical and horizontal tolerances. Simply mount, adjust, and move on. The sliders are also equipped with butyl sealant pads that instantly create a waterproof seal at all roof penetrations.

Better aesthetics

One of the most innovative aspects of the OnEnergy system is the talon clip. They grip each module securely in place while integrating so smoothly that no parts of the mounting structure are visible on the roof.

Mounting hardware

The mounting hardware is made of steel because it’s structurally superior to aluminum. We treat it with SuperDyma®, a rugged, corrosion-resistant, scratch-resistant alloy coating designed especially for outdoor exposure. SuperDyma is so effective it’s used as standard corrosion protection throughout the automotive industry. Self-tapping screws eliminate the need for pilot holes, and the screws and bolts are standardized to minimize tool changes.

Integrated trim covers for form, function and a finishing touch
Front, top and side trim covers provide a finished appearance while decreasing wind drag and improving water channeling. The result is a streamlined system with clean aesthetics.

OnEnergy Systems (Includes SRS)

OnEnergy systems include the innovative racking system, sleek, high-performance solar modules, and the hardware required for a speedy installation. Components are delivered precut and pre-drilled, and the highly versatile racking system allows installation on nearly any roof, including asphalt shingle, concrete flat tile and curved Spanish tile. Custom-designed to fit and complement each roofline, the OnEnergy system is engineered to install securely without compromising the integrity of the roof.

WATTSON - Solar Panel Tracking Hardware

The Wattsun azimuth tracker automatically tracks the sun by rotating the PV array about the pipe mast. Then it tilts for elevation position. The Dual-Axis Option enables it to capture virtually all the power the sun delivers.

Compared to passive, tilt and roll trackers, azimuth trackers provide greater stability for large arrays. The corners do not protrude down towards the ground or stick up in the air to catch the wind. The bottom edge of the array always remains parallel to the ground and requires less ground clearance than tilt & roll designs

Wattsun Solar Trackers are available in five models. Most small trackers can ship via UPS for added savings. Your selection of a specific Wattsun tracker depends on your application and PV array size. For physical size comparison, we have noted the typical number of 75 watt modules that can mount on each tracker.

This product is special order only. Please contact a DC Power Systems representative for details. Dealers must specify module type and quantity wanted.

Passive Solar Panel Tracker for Photovoltaic Modules

SIMPLICITY AND ELEGANCE: The sun's heat moves liquid from side to side, allowing gravity to turn the Track Rack™ and follow the sun – no motors, no gears and no controls to fail.

UNIVERSAL: Six standard UTR and UTR-F Track Racks™ fit all common photovoltaic modules.

EASY TO TRANSPORT: The Universal Track Rack™ is "knocked down" and packaged in one to four (depending on the size of the rack) easy-to-handle boxes that fit conveniently into a pickup truck.

Six Sizes Fit All - The Zomeworks Universal Rack System allows for almost limitless adjustment in both the east-west and north-south directions. Available in five standard sizes for holding 2 to 32 modules, Universal Track Racks are designed to fit all common photovoltaic modules, including ASE, Astro Power/PV, BP/Solarex, Evergreen, Kyocera, PhotoWatt/Matrix, Siemens, Uni-Solar, and most other popular modules. This flexibility translates to faster delivery, better quality and overall economy.

UNIVERSAL TRACK RACK™ Features:

• Stainless Steel and Zinc Plated Hardware
• Both module specific and J-Clip design
• 10 year Standard Warranty with Extended Warranty available
• F-Series Track Racks™ ship partially assembled for easy installation
• UTRK 040 with dual shock absorbers for more stability and early morning wake-up fin for fast response.
• Lighter and easier to install. Ships via UPS.
• UTRF 168 now comes with four shock absorbers for improved stability (equivalent to a high wind kit)
• ZW-2003 Shock Absorber – Exclusively from Zomeworks. Now standard on all F-series Track Racks.

This product is special order only. Please contact a DC Power Systems representative for details. Dealers must specify module type and quantity wanted.

Direct Power and Water Corporation is a premier photovoltaic system integrator and a major manufacturer of photovoltaic racks, equipment enclosures and battery enclosures. They design, engineer and manufacture solar racking structures and equipment enclosures for all of the major photovoltaic distributors and system integrators throughout the United States.

As a custom metal fabricator, their primary manufacturing focus is to design, engineer and fabricate photovoltaic mounting structures for photovoltaic modules and enclosures for batteries and electronic equipment.

POWER-FAB, a division of Direct Power and Water Corporation, produces the most sensibly designed and rugged mounting structures in the PV industry, with a focus on strength and ease of installation. They offer several rack styles to meet a wide variety of applications.

IronRidge, formerly Two Seas, has been manufacturing and delivering solar mounting and racking systems for over a decade. IronRidge offers a comprehensive suite of products for industrial, commercial, and residential solar projects. Ease of installation, competitive pricing, product reliability, and superior customer service are a few of the reasons solar integrators and installers prefer IronRidge.

Easy to Install - Featuring a minimal part count and step-by-step installation guides, IronRidge products are fast and easy to install.

Durable and Reliable - Stamped by a professional engineer, our efficient and flexible designs are engineered to withstand severe weather conditions in diverse climates.

Flexibility - IronRidge mounting solutions are designed to work with most major PV modules, providing flexibility in scheduling, pricing, and availability.

Superior Customer Service - We back our quality products with responsive service and an expert support staff. Count on us to ensure the success of your projects.

Scalability - Our domestic and international manufacturing facilities enable IronRidge to deliver product quantities for the largest commercial jobs.

Competitive Pricing - IronRidge prices are not only competitive, but are much less than the competition when the Total Cost of Installation (TCI) is considered.

Whether your plans call for a few modules on a pole, a roof-mounted grid-tied array, or a megawatt in a field, Unirac has your PV mounting solution. Their products are carefully engineered and rigorously subjected to destructive testing. Unirac's program of PE certification has earned the confidence of their customers and facilitates a quicker, well documented inspection process. To the left you will find the different systems for different applications that Unirac offers. If you have any specific questions or need help designing your mounting system, give us a call: 1-877-MAKE PWR

Since delivering its first PV mounting system in 1998, Unirac has experienced remarkable growth of its innovative and superior racking systems. They continue to be selected for many prominent installations such as the Google Campus in Mountain View, California, the largest corporate solar installation in the U.S. to date; as well as Universal Studios, in California, just to name a few.

Manufacturer of the most innovative structural rack mounting solutions for the solar industry

The roots of Professional Solar Products (ProSolar) dates back to 1977, over thirty years ago. Professional Solar Products, Inc. is located in Oxnard, CA, approx. 60 miles North of Los Angeles and approx. 40 miles South of Santa Barbara in Ventura County. Their location results in shorter delivery lead times to their west coast/south-west customers.

Professional Solar is the leading manufacturer of photovoltaic (PV) mounting systems and a variety of structural roof attachments designed for the professional installer. Their products offer a significant value over the competition in regards to quality and price.